Home :: Fasco Epoxies Inc. :: Fasco 9xn 2000 Super Slick Epoxy Coating

Fasco 9xn 2000 Super Slick Epoxy Coating

Fasco 9xn 2000 Super Slick Epoxy Coating
SKU
F9xn2000q
Mixing Ratio
1:1
Our price:
$33.00
Select Each or Case
Select Kit Size
Qty

12 Quarts per case

4 Gallons per case

Field tested on thousands of airboats in the Florida Everglades for over 37 years.

  • Super Slick is an Epoxy Coating unlike other competitor coatings.
  • Super Slick surface contains teflon plus additional friction reducing additive.
  • Same Steelflex toughness and durability proven on airboats since 1961.
  • Long life--Stays slippery as long as steelflex is on the boat
  • Can be rolled, brushed, or poured and spread.
  • Application and dry time same as regular steelflex.
  • Coverage: About 120 sq. ft. per gallon
  • Go to our pigment page to customize the color of your super slick 2000 
  • 4oz of pigment per gallon Add pigment to part 2 Click for Pigment

 

COVERAGE

Approximately 120 sq. ft. per gallon and 30 sq. ft. per quart.

PREPARATION

  1. The best preparation is to sandblast the airboat and then grind the metal surface with a 24-grit disc. Make the surface as rough as possible and wipe it clean with lacquer thinner or acetone.
  2. For fiberglass, the rougher the better. Do not over rough the fiberglass or you may go too deep causing holes. Use your best judgment. Blow off fiberglass and if possible, wipe it down with acetone.

MIXING

1. Mix equal parts of #1 and #2 Steelflex 9X-2000. Thoroughly mix down from the sides and bottom of the container. Electric drill mixing does not mix the two parts together as well as hand mixing.

"IT IS NOT HOW FAST YOU MIX BUT HOW THOROUGHLY YOU MIX IT".

Mixing is the most important part of the application.

NOTE: IF USING A COLOR, REFER TO THE LAST PARAGRAPH BELOW.

APPLICATION

  1. Immediately pour out the mixture over the entire bottom of the surface and spread evenly.
  2. DO NOT USE BELOW 65°F.

DRY AND CURE TIME

DRY: Approximately 6 hours.

CURE: 48 hours.

COLORS

9X-2000 Neutral is formulated to add one of our standard #109 pigment colors. They are: black, grey, brown (reddish), beige, light blue, royal blue, emerald green, olive drab, yellow, red, orange, midnight blue

One quart requires 1 ounce of pigment and one gallon requires 4 ounces of pigment. Add the pigment to Part 2 to insure that the color will be the same every time. Be sure to mix the pigment in well and then mix Part 1 and Part 2 together.

Fasco 110 Epoxy Glue
$13.00
FASCO 9XN Steel Flex Epoxy Coating Neutral
$20.00
Fasco Epoxo 88 Regular Paste
$13.00
Fasco Epoxo 88 Clear Paste
$15.00
Fasco Epoxo 88 Superflex Paste
$13.00
Fasco 7 Fas-Stone Epoxy Patching Compound
$13.00
Fasco 9xw Steel Flex Epoxy Coating White
$21.00
Fasco Pigments
$6.00
Fasco 39 Clear Gloss Table Top Epoxy
$17.00

Product rating

Customer Reviews

Fasco Fillers/Additives

Fumed Sillica
1/4" Chopped Fibers
Glass Bubbles
Talc Powder

Fas-Grip Non-Skid

Non-Skid

Fast Stone #7

Fasco #7 Regular
Fasco #7 Underwater Paste

Steelflex Epoxy #9X

Fasco #9XC Clear Steelflex
Fasco #9XN Neutral Steelflex
Fasco #9XN 2000 Superslick
Fasco #9XS Super Steelflex
Fasco #9XW White Steelflex

Ultra Clear #23

Ultra Clear #23

Fas Fair #26

Fasco #26 Fairing Compound
Fasco #26 MEC Marble Compound

Fas Cast #34

Fasco #34 Casting Epoxy

Table Top #39

Fasco #39 Table Top Epoxy

Water Reducible #50WR

Fasco #50WR Water Reducible Epoxy
Fasco #50WR Color

Fasco #55

Fasco #55 Clock Epoxy
Fasco #55F Fishing Rod Epoxy

Fasco #88 Epoxo Paste

Fasco #88 Clear
Fasco #88 Regular
Fasco #88 Superflex

Fasco #88 Epoxo Liquid

Fasco #88 Epoxo Liquid

Fasco #99 Stop Rot

Fasco #99 Stop Rot

Fasco #103 LVX

Fasco #103 Laminating Epoxy

Fasco Pigments

Epoxy Pigments

Fasco #110 Glue

Fasco #110 Glue
Fasco #110 Fast Set Glue

Gift certificates