Fasco Clear Water Reducible Epoxy
- 2:1 Mix Ratio Can be applied over damp surfaces
- Can be sprayed or brushed on Styrofoam without damaging the foam,
- Good adhesion to concrete, wood, metal, foam, etc.
- Excellent for fresh concrete and damp masonry.
- Water is used for thinning and clean up
- Seals wood surfaces without raising nap
- Very little odor or fumes
- Good chemical resistance
- Non-Flammable
- No bleed-through over asphalt surfaces
- coverage is 300 sq feet per gallon
Application:
1. 50WR can be applied to either damp or dry surfaces provided they are clean.
2. Can be applied by brush roller or spray. To thin, add water.
3. Average dry time: 3 Hours at 72 degrees Fahrenheit.
4. 2:1 mix unlike other epoxies this is mixed 2 parts hardener to one part resin.
Caution: Apply the epoxy in thin coats and allow to dry tack-free before applying another coat. THICK COATS CAN CAUSE BLISTERS. Always use a mask and goggles when spraying this product. Do not allow contact with eyes and avoid breathing fumes.
