Home :: Steelflex Epoxy #9X :: FASCO 9XN Steel Flex Epoxy Coating Neutral

FASCO 9XN Steel Flex Epoxy Coating Neutral

FASCO 9XN Steel Flex Epoxy Coating Neutral
SKU
9XNQK
Weight
3.25 lbs
Mixing Ratio
1:1
Our price:
$49.99
Click here to be notified of price drops of this item
 
Select Each or Case
Select Kit Size
Qty
Click here to subscribe for 'Back-in-stock' notifications
Click here to be notified when this item is nearly out of stock

12 quarts per case

4 Gallons per case

Epoxy solvent free coating for:

  • Steel-Aluminum-Fiberglass-Concrete-Wood-Styrofoam
  • Strong Adhesive-Abrasion and Impact Resistant-Flexible is a 2 part component equal part mix
  • Coverage is approximately 120 sq ft per gallon.
  • The neutral color is a transparent looking tan color. The neutral is really meant for coloring. If you just need the protection and don't care what the color looks like, the neutral would be a good choice. Add pigment for a desired color.
  • 4oz of pigment per gallon. Add Pigment to part 2  Click for Pigment

 

PREPARATION

  1. The best preparation is to sandblast the airboat and then grind the metal surface with a 24-grit disc. Make the surface as rough as possible and wipe it clean with lacquer thinner or denatured alcohol using the 2 rag system (Wipe On/Wipe Off).
  2. For fiberglass, the rougher the better. Do not over rough the fiberglass or you may go too deep causing holes. Use your best judgment. Blow off fiberglass and if possible, wipe it down with acetone.

MIXING

1. Mix equal parts of #1 and #2 Steelflex 9X. Thoroughly mix down from the sides and bottom of the container.

Electric drill mixing does not mix the two parts together, causes air bubbles

Hand mixing is best.

"IT IS NOT HOW FAST YOU MIX BUT HOW THOROUGHLY YOU MIX IT".

Mixing is the most important part of the application.

NOTE: IF USING A COLOR, REFER TO THE LAST PARAGRAPH BELOW.

APPLICATION

  1. Immediately pour out the mixture over the entire bottom of the surface and spread evenly.
  2. DO NOT USE BELOW 65°F.

DRY AND CURE TIME

DRY: Approximately 6 hours.

CURE: 48 hours.

COLORS

9X- Neutral is formulated to add one of our standard #109 pigment colors. They are: black, grey, brown (reddish), beige, light blue, royal blue, emerald green, olive drab, yellow, red, orange, midnight blue

One quart requires 1 ounce of pigment and one gallon requires 4 ounces of pigment. Add the pigment to Part 2 to insure that the color will be the same every time. Be sure to mix the pigment in well and then mix Part 1 and Part 2 together.

Fasco 110 Epoxy Glue
$34.99
Fasco Epoxo 88 Clear Paste
$26.99
Fasco 26 Epoxy Fairing Compound
$41.99
7 Fas-Stone Epoxy Patching Compound
$32.49
Fasco 9xw Steel Flex Epoxy Coating White
$49.99
$58.99
Fasco Pigments
$7.99
Fasco 39 Clear Gloss Table Top Epoxy
$29.99
Graphite Powder Filler
$6.95

Product rating

Customer Reviews

Fasco Fillers & Additives

Fumed Sillica
1/4 Inch Chopped Fibers
Glass Bubbles
Talc Powder
Micro Balloons
Wood Flour
Graphite Powder

Fas-Grip Non-Skid

Non-Skid

Fast Stone #7

Fasco #7 Regular
Fasco #7 Underwater Paste

Steelflex Epoxy #9X

Fasco #9XC Clear Steelflex
Fasco #9XN Neutral Steelflex
Fasco #9XN 2000 Superslick
Fasco #9XS Super Steelflex
Fasco #9XW White Steelflex

Ultra Clear #23

Ultra Clear #23

Fas Fair #26

Fasco #26 Fairing Compound
Fasco #26 MEC Marble Compound

Fas Cast #34

Fasco #34 Casting Epoxy

Table Top #39

Fasco #39 Table Top Epoxy

Water Reducible #50WR

Fasco #50WR Water Reducible Epoxy
Fasco #50WR Color

Fasco #55

Fasco #55 Clock Epoxy
Fasco #55F Fishing Rod Epoxy

Fasco #88 Epoxo Paste

Fasco #88 Clear
Fasco #88 Regular
Fasco #88 Superflex

Fasco #88 Epoxo Liquid

Fasco #88 Epoxo Liquid

Fasco #99 Stop Rot

Fasco #99 Stop Rot

Fasco #103 LVX

Fasco #103 Laminating Epoxy

Fasco Pigments

Epoxy Pigments
Pearlescent Pigments

Fasco #110 Glue

Fasco #110 Glue
Fasco #110 Fast Set Glue

Gift certificates